womixcity.com

Diy Drag Harrow. Eye bolts, the rest were scraps. Added some 1x 4 boards to the bottom, ran some 1/2 lag bolts (maybe 100) thru the added boards and bottom of the skid so they stuck out approx an inch.

Make a frame, short 2x4 bolted on top. They are made from five pieces 1. Different 2x4s with different spike angles could even be attached.

The whole thing is put together using lag screws.

Different 2x4s with different spike angles could even be attached. I have a 5ft section that we burned holes through and use chain to square it up and pull. Not a wood railroad tie but a piece of rail. Something else that can be used is a piece of railroad rail.

I only bought 1 2x6 and the galv. The spikes are 6' apart and the back row is offset 3' from the front. Flip this over so the protruding screw threads would scratch the ground for prepping the soil for seeding native grasses and forbs. It does not have to be longer if you are working with a section of chain link fences that is longer than 6 feet.

Something else that can be used is a piece of railroad rail. Drive the nails/spikes through the long 2x4s. Place the section of chain link fence on a flat, hard surface, like the floor of your garage. Fall might not be a good time to plant pasture seeds.

As the operator is driving the tractor they will be able to tell if the harrow is going deep enough. Flip this over so the protruding screw threads would scratch the ground for prepping the soil for seeding native grasses and forbs. Screw in the i bolts and use a rope to hook it to the tractor. That seems like a lot of moola for something form something so simple that i might use once a year.

Then, cut a section of rope approximately 6 feet long. I have a 5ft section that we burned holes through and use chain to square it up and pull. I used a approx 4 ft square skid. Designed to break up dirt or cinders on the baseball field or track.

The first is by simply placing a few weights on the corners of the harrow. Not a wood railroad tie but a piece of rail. This is a drag harrow i made for my garden from 4x6's and railroad spikes. The first is by simply placing a few weights on the corners of the harrow.

Next i created what we’ll call the cross members. Two i screws, 3 inch long. Thick, this drag harrow for leveling is equipped for a variety of tough jobs. Next i created what we’ll call the cross members.

The seven horizontal rows of tines with 69 tines overall make this drag harrow ready for your tough jobs. I have a 5ft section that we burned holes through and use chain to square it up and pull. Diy drag harrow versatility is the key. Some adjustments are always needed at the start of use.

Flip this over so the protruding screw threads would scratch the ground for prepping the soil for seeding native grasses and forbs. Keep wetting the column with a hose for about a week. Weight is perfect and does an awesome job as a drag. A driveway drag is a simple yard implement designed to grade gravel driveways that have become bumpy due to extended use and heavy rains.